What Size Nap Roller For Exterior Siding?

Answer:

Painting Tools Needed For Rolling Exterior Paint The best universal roller cover nap thickness is 3/4 inch, for most lap siding applications. 1 inch or thicker should be used on stucco and concrete block.

Answer:

The fastest way to complete the job is to use a brush to cut in, or paint corners and crevices that a roller can’t reach. Then use the roller to cover the main surface of the boards. Choose a roller that has a nap of at least 3/4 inch.


How To Paint & Maintain Your T1-11 Siding


Frequently Asked Questions

What size roller nap should I use?

1/4-inch nap is best for very smooth walls, ceilings, cabinetry, and other surfaces without texture, including metal. 3/8-inch nap is good for lightly textured surfaces, including most interior walls. 1/2-inch nap is a good length for moderately textured walls, paneling, and painted brick or concrete.

Can you paint siding with a roller?

Unfortunately, it is not usually possible to use only a roller to paint wood siding. It is difficult to deliver an even coat of paint to areas like corners and overlapping siding with a roller. Use a paintbrush to cut in around trim, windows, vents, corners, and underneath any overlapping boards.

How do you paint the exterior of a house with a roller?

1:387:31Exterior Painting Step 7: Brushing and Rolling the House - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then I follow that straight back and bring it off no that's gonna help those roller marksMoreAnd then I follow that straight back and bring it off no that's gonna help those roller marks disappear. Now I do the same thing over here nice.

How big of a nap do I need for a roller cover?

Rough surfaces require a higher nap (3/4” to 1-1/2”) so the long fibers can reach into the valleys of the texture. Higher nap heights are great for textured plaster or stucco, siding, decks, concrete block, brick, and corrugated metal.

What kind of roller cover to use on siding?

Use a lamb’s wool cover for the easiest and best results. The best universal roller cover nap thickness is 3/4 inch, for most lap siding applications. 1 inch or thicker should be used on stucco and concrete block.

Which is the best nap roller to use?

Small 1/4″ nap roller covers or foam rollers will produce the smoothest finish and are ideal for use on walls, wood, and metal surfaces. It’s important to choose the right size nap for your project. If you use a thick 3/4″ nap roller cover on a smooth wall, it will produce an orange peel textured surface.

How big should a roller cover be for a rough surface?

Sometimes faster isn’t always better! Rough surfaces require a higher nap (3/4” to 1-1/2”) so the long fibers can reach into the valleys of the texture. Higher nap heights are great for textured plaster or stucco, siding, decks, concrete block, brick, and corrugated metal.

Add a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.