Measure from front edge to back of your existing top, or add one inch to the depth measurement of your top-less cabinet. A common bathroom vanity size is 21D inches, which would mean a 22D-inch top.
How do you measure for a bathroom vanity top?
- Measure the width of the vanity at the base with a tape measure by measuring the front side of the vanity along the…
- Measure the top width of the vanity if the vanity is covered with a counter that is wider than the base.
- Measure the depth of the base from the front of the vanity to the back wall.
MarCraft, Inc. – How to Measure and Install an Vanity Top that is Open on Both Ends
MarCraft, Inc. – How to Measure and Install a One Wall Vanity Top
Frequently Asked Questions
What should the width of a vanity cabinet be?
Typical cabinet widths are 24, 30, 36, 48 and 60 inches If you're purchasing a vanity without a top, you’ll also need to measure for the countertop. Measure the width and depth of the vanity cabinet. The vanity top should be 1 inch wider and 1 inch deeper than the vanity cabinet. Be sure to include allowances for fillers if you plan on using them.
How to measure your Vanity top-the marble factory?
Measurements can be taken off a vanity (cabinet) in place or an existing top; however, measurements submitted must be of the actual vanity top. 2. Standard vanities are either 21” (most popular) or 18” deep thus standard vanity tops are standard 22” or 19” deep (A). However, The Marble Factory can make tops in any depth up to 30”. 3.