Go outside and use a hole-cutting saw to enlarge the hole so that the cable connector on the back of your electrical box will fit inside. Thread a piece of exterior-grade electrical cable from the interior electrical box through the hole in the exterior wall. Be sure the cable is long enough to reach from the interior to the exterior box.
How to Install the Easiest Outdoor Socket
Outdoor Outlet from Indoor Outlet Installation
Electrical Help : How to Install a Power Receptacle Outside
Frequently Asked Questions
How do you add an electrical outlet outside?
0:566:14How to Install an Outdoor GFCI Electrical Outlet | The Home Depot ...YouTubeStart of suggested clipEnd of suggested clipUse a hammer and a flathead screwdriver to knock out one of the holes in the back of the box. With aMoreUse a hammer and a flathead screwdriver to knock out one of the holes in the back of the box. With a long bit drill through the hole in the box until you reach through to the outside.
Does an outdoor outlet need to be on its own circuit?
That being said, no, outdoor outlets are not required to be on a separate circuit. They do need to be protected by a GFCI which can either be a GFCI breaker or the familiar “outlet with buttons” wall box mounted unit.
How much does it cost to have an electrical outlet installed outside?
Quick Summary: Outdoor Outlet Installation Cost Generally, it will cost between $350 and $400 including labor and materials to install an outdoor outlet for a newer home. If the home is older and needs additional wiring or electrical panels installed, the average price ranges between $1,000 and $1,400.
How can I put lights outside without an outlet?
There are many alternatives to power outdoor lights without having an electrical outlet installed in the yard. They involve using various types of solar garden lighting fixtures, battery operated lighting, Bluetooth operated lights, battery-powered outlet, wireless LED motion sensor lights, and real or LED candles.
How do you install a Romex electrical outlet?
Strip the outer coating from the Romex and strip the black and white wires about 3/4 inch. Bend a half moon and wrap the black wire clockwise around the brass colored screw. The white wire is next and it is attached similarly, only to the silver colored screw. The bare copper wire connects to the green screw.