How Much Does It Cost To Replace Drywall In Bathroom?

4.5 rating based on 105 ratings

Cost to Drywall a Bathroom . The average cost to drywall a bathroom is around $430 to $500, depending on the size and use.

Replace Drywall: national average cost. The national average materials cost to replace drywall is $0.53 per square foot, with a range between $0.45 to $0.61.

how much does it cost to replace drywall in bathroom?


⏯ – Drywall Ceiling Patches From Plumbing Leak and Cost To Patch


People Also Ask – 💬


⏯ – How to bid(estimate ) a Drywall remodel!


⚡Similar questions on request: “how much does it cost to replace drywall in bathroom?”⚡

How much does it cost to replace drywall in a bathroom?

Written by HomeAdvisor. Drywall installation costs $1,877, with a typical range of $993 and $2,920. This cost translates into a price of $1.50 to $3 per square foot for materials and labor. Most homeowners pay $2 per square foot, depending on the number of rooms and the level of finish.
👉
www.homeadvisor.com.

How much does it cost to drywall a 10x10 room?

How Much Does It Cost to Install Drywall per Square Foot? The average cost to install drywall, including the finishing, taping, labor costs, and materials, is between $1.50 to $3 per square foot. This cost works out to around $60 to $90 per drywall panel.
👉 www.angi.com.

How much does it cost to install 1000 square feet of drywall?

The national average cost to install drywall is between $1,600 and $3,500, with most homeowners spending around $2,000 on 1,000 sq. ft. of standard ½” drywall, hung and finished in a remodel.
👉 www.fixr.com.

How much does it cost to drywall a bathroom ceiling?

The national average materials cost to replace ceiling drywall is $0.53 per square foot, with a range between $0.45 to $0.61. The total price for labor and materials per square foot is $3.52, coming in between $3.14 to $3.90.
👉 porch.com.

How do you fix a water damaged bathroom wall?

Follow these steps to do so:

  1. Step 1: Remove the tiles from the affected area. …
  2. Step 2: Remove the base or shoe trim. …
  3. Step 3: Locate the next closet stud. …
  4. Step 4: Cut out the damaged drywall. …
  5. Step 5: Replace rotted studs. …
  6. Step 6: Replace the removed drywall. …
  7. Step 7: Fill in screw holes and seams.

👉 www.porterscleaning.com.

How much does it cost to remove a drywall?

Removing drywall from ceilings and walls runs $0.50 to $1 per square foot. Taking out a wall costs anywhere from $300 to $1,000, depending on size, insulation type, and weight.
👉 www.homeadvisor.com.

How much should drywall finishing cost?

The cost of finishing drywall is typically in the range of $1.00 to $1.65 per square foot, not including labor. For an average 12' x 12' room (144 square feet), those costs would translate into a drywall finishing cost of anywhere from $144 to $238.
👉 rethority.com.

How much do you charge to hang drywall?

People typically charge about $1,800, or between $955 and $2,550 to hang drywall. Low-end jobs can run about $450 while high-end jobs reach $5,000 or more. That means you should charge between $1 and $3 per square foot for materials and labor for an average project.
👉 pro.homeadvisor.com.

How do you quote a drywall job?

Multiply drywall square footage by the going rate The total drywall square footage numbers can be used to estimate both material and labor costs. For example, if you find that your house will require 150 sheets of 4' x 12' drywall, you know you will need about 7,200 ft2 of drywall (48 ft2 * 150 sheets = 7,200, ft2).
👉 drywall101.com.

How much does it cost to replace bathroom ceiling?

Ceiling Painting Repair Cost

CeilingAverage Cost
Bathroom$50 – $300
Bedroom$150 – $600
Living Room$250 – $1,000
Kitchen$100 – $500

👉 homeguide.com.

Is drywall ruined if it gets wet?

While drywall is pretty sturdy, when it's exposed to water for too long it can get damaged. It may lose its structural integrity, becoming soft and weak. Depending on what category of water drywall is exposed to, and how wet it got, you may be able to save it. Speed is critical to avoiding mold damage, though.
👉 www.greencleancare.com.

Does water damaged drywall need to be replaced?

In that case, it's almost impossible to revert your drywall to its original condition. If left untreated, heavily soaked drywall can deform or even collapse. As a result, a drywall replacement is the best bet to protect the integrity of your home.
👉 www.alldryus.com.

How much does it cost to drywall 500 square feet?

For a basic project in zip code 47474 with 500 square feet, the cost to Hang Drywall starts at $1.86 – $2.32 per square foot*. Actual costs will depend on job size, conditions, and options. To estimate costs for your project: 1.
👉 www.homewyse.com.

How much should I charge to install drywall?

Cost of Common Drywall Types

TypeUseCost Per Sheet
StandardAll-purpose$10-$20
SoundproofWalls and ceilings$50
Mold-resistantBathrooms, basements, moist areas$13-$15
Fire-resistantGarages, rooms with furnaces or wood stoves, utility rooms$13

👉 pro.homeadvisor.com.

How much does it cost to have someone mud and tape drywall?

The average cost to tape and mud drywall is $0.35 to $1.10 per square foot, not including sanding or the final finish to prime the surface for paint. Taping and mudding drywall joints for a standard 12' x 12' bedroom costs $180 to $580.
👉 homeguide.com.

How do I estimate the cost of drywall?

Calculate how many drywall sheets you will need by dividing the total square footage of area by 32 (if you're using 4-by-8 sheets) or by 48 (if you're using 4-by-12 sheets). If you want to get the cost, just multiply the total number of sheets by the price per sheet. Remember to add local taxes and delivery charges.
👉 www.thespruce.com.

How much does drywall mudding and taping cost?

The average cost to tape and mud drywall is $0.35 to $1.10 per square foot, not including sanding or the final finish to prime the surface for paint. Taping and mudding drywall joints for a standard 12' x 12' bedroom costs $180 to $580.
👉 homeguide.com.

How much does it cost to hang and finish drywall per sheet?

Cost of Common Drywall Types

TypeUseCost Per Sheet
StandardAll-purpose$10-$20
SoundproofWalls and ceilings$50
Mold-resistantBathrooms, basements, moist areas$13-$15
Fire-resistantGarages, rooms with furnaces or wood stoves, utility rooms$13

👉 pro.homeadvisor.com.

How much does it cost to hang and tape drywall?

People typically charge about $1,800, or between $955 and $2,550 to hang drywall. Low-end jobs can run about $450 while high-end jobs reach $5,000 or more. That means you should charge between $1 and $3 per square foot for materials and labor for an average project.
👉 pro.homeadvisor.com.

How much does drywall cost to hang and finish?

Drywall installation costs $1.50 to $3.50 per square foot, depending on the ceiling height, drywall type, and level of finish. Drywall costs $0.50 to $0.80 per square foot for materials. The labor cost to hang and finish drywall is $1.00 to $2.70 per square foot. The cost to drywall a 12x12 room is $580 to $1,800.
👉 homeguide.com.


⏯ – New Construction Drywall Price – How Much To Drywall A House (MATERIAL and LABOR)


Add comment

Your email address will not be published. Required fields are marked *