How Difficult Is It To Move Bathroom Plumbing?

4.5 rating based on 105 ratings

Relocating plumbing can be a time consuming and hard work. That’s why you should only do it if you have prepared beforehand and if you have confidence in the professionals you chose to do the job. But take comfort in the fact that once it’s done, you won’t have to think about it for a long time.

Any change in the bathroom floorplan is not easy. Altering where you place the toilet, sink, or bathtub will cost you big bucks. To move any plumbing fixture more than three feet, you will have to shell out anything between $500 to $1000. Also, the possibility of certain changes will depend on what type of dwelling you are renovating.

how difficult is it to move bathroom plumbing?

If you’re moving fixtures, it can take three to five days. Even three days will double the cost and if it takes five days, it will cost over three times as much to move the fixtures.

Drains are much harder to move as you need to make sure there is a ¼ inch drop for every horizontal foot of movement. So, for example, if you want to move a toilet 3 feet, then you would need a total of ¾’ drop in your drain, ¼” for every foot. If you want to move a toilet 6 feet, then you will need approximately 1 ½” (6/4″) of drop.

People Also Ask – 💬

❓ Should you move every plumbing fixture in the bathroom?

Think twice before you make this decision and look for ways to avoid moving every plumbing fixture in the bathroom: Moving a sink may be the least expensive, but the sink should be on the same wall or moving it can be expensive. Moving a shower involves changing pipes in the wall and under the floor.

❓ What is the least expensive way to move a bathroom?

1 Moving a sink may be the least expensive, but the sink should be on the same wall or moving it can be expensive. 2 Moving a shower involves changing pipes in the wall and under the floor. Drainage also has to be moved. ... 3 Moving a bathtub includes relocating drainage and the hot and cold water. ... 4 Moving a toilet can be very expensive. ...

❓ Should I move the toilet or sink in my bathroom?

While you will have to re-tile and possibly paint the wall, you won't have to move the drainage and moving the water supply will cost far less than moving the toilet to another location. Rather than move a sink, look for more modern sinks.

❓ How long does it take a plumber to move plumbing?

If you're moving fixtures, it can take three to five days. Even three days will double the cost and if it takes five days, it will cost over three times as much to move the fixtures. Most plumbers charge up to $85 per hour and the cost can be as high as $100 to $150 per hour.


⏯ – How To Move Bathroom Toilet Drain Line A Few Feet – Home Remodeling Plumbing Modifications Part 1


⚡Popular questions on the topic: “how difficult is it to move bathroom plumbing?”⚡

How much does it cost to move a bathroom pipe?

Average Costs On average, it costs somewhere between $500-$1,000 to move a plumbing fixture around three feet or more. This varies, of course, depending on if your plumber needs to move anything around to connect to your drain, vent, or water lines.
👉
eco1plumbingmiami.com.

How much does it cost to move bathroom sink plumbing?

Cost of Moving Bathroom Plumbing

Fixture/MoveCost to MoveTotal Cost w/ Material and Installation
Bathroom sink$240 – $600$540 – $6,100
Plumbing line in concrete$500 – $1,000$550 – $1,500
Toilet$200 – $400$550 – $3,900
Shower plumbing$240 – $600$1,740 – $4,100

•Jan 2, 2022
👉 www.fixr.com.

Is it expensive to move toilet plumbing?

Cost of Moving Plumbing Fixtures The cost to move a toilet or sinks can be $2,500-$3,500 per fixture. Plumbing can be a significant cost factor in a remodel when a bathroom floor plan is altered. The toilet is the most expensive to move.
👉 www.baycitiesconstruction.com.

How do I move my bathroom water pipes?

0:4118:49Moving Water Lines. DIY Plumbing renovation – YouTubeYouTubeStart of suggested clipEnd of suggested clipRight now I got a drill a hole through the floor. So I know where to run those pipes. And we'reMoreRight now I got a drill a hole through the floor. So I know where to run those pipes. And we're gonna draw a map. The hot water line we got the cold water line coming in I'm gonna put a tee here.
👉 www.youtube.com.

How much does it cost to reroute water pipes?

Rerouting a single line averages $650 to $1,500, not including the cost of drywall or framing removal and replacement. The total cost will vary considerably based on factors like the line length and accessibility. A line under a slab is often more expensive to reroute than a line in a crawlspace, basement or wall.
👉 www.homeadvisor.com.

How much does it cost to reroute a pipe?

Rerouting a single plumbing line will cost about $700 while repiping a whole house will cost between $3,900 and $7,500. If you must move plumbing fixtures such as sinks, toilets, bathtubs, or showers, it's worth designing a plan that makes the best use of existing pipework rather than digging into the slab.
👉 homeguide.com.

How difficult is it to move water lines?

Moving kitchen plumbing is very difficult if your house is on a slab foundation. Water pipes can often be rerouted through walls or ceilings, especially if you use flexible PEX pipe. However, because the drain needs to have pitch and be lower than the fixture, it requires cutting and jack hammering through the slab.
👉 www.hunker.com.

Is it possible to relocate a toilet?

Yes, you can actually move a toilet. Even moving a toilet by a few inches without having to make a new hole in the floor is possible. You can use an offset toilet flange to move the toilet by a couple of inches on any side. This will allow you to use the same wastewater line and in turn help to save you a lot of money.
👉 blog.mykukun.com.

How much does it cost to reroute plumbing?

Rerouting a single line averages $650 to $1,500, not including the cost of drywall or framing removal and replacement. The total cost will vary considerably based on factors like the line length and accessibility. A line under a slab is often more expensive to reroute than a line in a crawlspace, basement or wall.
👉 www.homeadvisor.com.

How do you reroute water pipes?

0:373:23Rerouting Copper Water Pipes in Wall – Part 6 of Remodeling My KitchenYouTube
👉 www.youtube.com.

Can you move bathroom to another room?

It may be possible to re-use your old bathroom suite, although new bathroom fixtures can be very affordable if not. The cost of moving a bathroom to the next room is cheaper than the cost to move a bathroom upstairs. Moving a bathroom is a complex, arduous and time-consuming job that is best left to professionals.
👉 www.checkatrade.com.

Does repiping a house add value?

They won't even pursue negotiations or ask for repairs. Repiping can automatically increase the value of your home by just making it sellable. The value would go from zero to your listing price.
👉 www.integrityrepiping.com.

How much does it cost to reroute plumbing in slab?

Slab leak reroute: Rerouting is commonly done when a customer refuses to demolish a portion of the foundation and their flooring. A reroute job costs around $300 for shorter pipes or $1,500 or more for larger jobs. Waterline/water main repair: Water main repairs may cost anywhere between $500 to $3,000.
👉 whyrepipe.com.

Can I move a drain on my property?

The cost of moving a main drain You'll also need to get permission from your local water authority. If the drain is within its own property boundary that permission may not be required. However, any new drains will need to be witnessed by the building inspectors for sign-off as part of building regulations approval.
👉 www.checkatrade.com.

How much does it cost to relocate a shower drain?

Move a drain pipe: national average cost

cost to move a drain pipe
National Avg. Materials Cost per line$123.27
National Avg. Cost (labor and materials) for 1 line$705.25
National Cost Range (labor and materials) for 1 line$632.63 – $777.87

Jul 3, 2022
👉 porch.com.

How do I change my toilet location?

To move the toilet more than just a couple of inches, you will have to demolish the concrete to access and relocate water and waste lines. Then you will have to rebuild the concrete foundation and replace the sub-flooring, flooring, and fixtures.
👉 www.mrrooter.com.

Can you move a toilet to where a shower was?

Can you put a toilet where a shower was? The simple answer is yes, you can put a toilet where a shower was, but the move doesn't come without its issues. This isn't a simple DIY job. You are going to have to remove at least one wall and, hopefully, only a small portion of the floor.
👉 www.interiorsplace.com.

What is a plumbing reroute?

Plumbing rerouting means that the plumber will find a new entry and exit point for your pipes and start repiping from there. That way, the leaky pipes that run under the slabs will be cut from the system completely. Where the pipes will be rerouted depends on many factors, such as the size of your home or the code.
👉 anytimeplumbing.net.

How long does it take to reroute plumbing?

Typically, a job can run about two to four days.
👉 trueplumbinginc.com.

Can water pipes be rerouted?

Save your floor by hiring a local plumber to reroute the plumbing and avoid any further damage. But repiping a house built on a slab comes with challenges not seen with homes with a basement or crawlspace. Many plumbing professionals may choose to reroute existing pipes that are located in a slab.
👉 www.angi.com.

Add comment

Your email address will not be published. Required fields are marked *