New taps are all made to standard dimensions, but check the hole distances of old baths or basins, in case they are not compatible with mixer taps. Mixer tap holes for baths should be approximately 180mm (7.25in) apart, and 195mm (7.75in) apart for basins. Are all bathroom sink faucets the same size?
How to replace basin taps | fit basin taps
How To Fit New Basin Taps
How To Fit Basin Mixer Taps | Change MIxer Taps | Alterna Bristan Valenza Install
Frequently Asked Questions
Are all bathroom sink taps the same size?
Not all taps and countertop basins will be the same size, so you'll want to make sure that there is adequate space from the top of your countertop basin to where the spout exits on the tap. ... Always check the dimensions of the tap you're buying, as well as the area that you're fitting it in.
Are sink tap holes a standard size?
A standard sink faucet hole has a diameter of 1 3/8 inches, but because not all faucets are the same, some will require a 1 1/2-inch hole. It's also important to check the depth of the sink or countertop before installing a faucet or drilling a hole.
Are all tap holes the same size?
All tap holes are standard sized at 1 3/8 inches wide, but some faucets require a 1 1/2 inch hole. Tap holes are spaced apart 4 inches on center for center set faucets, and 6 to 8 inches on center for widespread faucets.
How big should the tap hole be on a bathtub sink?
Mixer tap holes for baths should be approximately 180mm (7.25in) apart, and 195mm (7.75in) apart for basins. Are all bathroom sink faucets the same size?